P370/P470 Keyless RF Scanners Product Reference Guide
MCL-Code Errors
After the execution of an MCL-Code command, variable &99 generally reports the result of
the command execution. The table below lists the standard error beeps used by the MCL-
Code commands. Following an error beep sequence, the green LED blinks for 5 seconds
and then the system automatically returns to the default application.
Beeps
Hi-Lo
Lo-Hi
Hi-Lo-Hi
Lo-Hi-Lo
Hi-Hi-Lo-Lo
C-4
branch error
•
jump out of the scope of the current program
•
label not found, too long
syntax error in an MCL command
•
command code invalid
•
mandatory argument missing or invalid
•
bad number of arguments:
•
check command syntax
•
check if any variable contains " | " characters, if yes, use VE
command to extract desired field
•
check line length (max. 512 characters) after variable
substitution (variables are replaced by their contents)
variable error
•
variable too big (in write command)
•
variable name invalid
serial error
•
attempt to execute SI or SO command on the Network
communication port
run program error
•
too many RM commands without the associated QX command
(max. 6 nested programs)
Description