Symbol P370 Keyless Reference Manual page 37

Parameter Control
Parameter Control allows you to control the scanner parameters such as Scan Parameters
and Set Default Params.
Option
1. Set Default Param
Version
Firmware Version
Restores the default parameters in the scanner. The default
parameters overwrite any scanned parameters.
To set default parameters, scan the barcode below:
This option displays the version of the scanner, MCL and cradle on
the host. For example, when the barcode is scanned the following
will display on the host:
Scanner: NBRVMAAA
MCL: 4.1x
Cradle: NBRVCAAG
To enter this mode from the default application scan the bar code
below.
Description
Set All Defaults
Firmware Version
Operation
2-7