Warmboot; Clearing Persistent Storage / Reset To Default Settings - Honeywell MX7 Tecton Reference Manual

Warmboot

A warmboot reboots the MX7 Tecton without erasing any registry data. Configuration settings and data in RAM are preserved
during a warmboot. Network sessions are lost and any data in running applications that has not been previously saved may be
lost. CAB files already installed remain installed.
There are several warmboot methods available:
Using the Registry, select
l
immediately warmboots.
Using the Start menu, select Start > Run and type WARMBOOT in the text box. Press Enter. The MX7 Tecton
l
immediately warmboots. The WARMBOOT text command is not case-sensitive.
Using the keypad, press the Ctl key and release it, press the Alt key and release it, press the Del key and release it. The
l
MX7 Tecton immediately warmboots.
A restart reboots the MX7 Tecton without erasing any registry data. Configuration settings are preserved during a restart.
Network sessions are lost and any data in running applications that has not been previously saved may be lost. The contents
of RAM are erased and the operating system and CAB files are reloaded.
To initiate a restart:
Using the Registry, select
l
immediately restarts.

Clearing Persistent Storage / Reset to Default Settings

Use the Registry control panel Load Factory Defaults button to set the MX7 Tecton registry back to actory defaults. No other
clearing is available or necessary.
Start > Settings > Control Panel > Registry
Start > Settings > Control Panel > Registry
and tap the Warmboot button. The MX7 Tecton
and tap the Restart button. The MX7 Tecton
4-3