Honeywell MX7 Tecton Reference Manual page 199

Options Function
pkt_size in Specifies the maximum packet size captured in bytes. This option should only be run after you have called load
bytes and stop. Default is 5000.
cap_size in Specifies the maximum size of Netlog0.cap or Netlog1.cap in bytes. This option should only be run after you
bytes have called load and stop. Default is 500,000.
Specifies the name of the file to which network traffic information is saved. This option should only be run after
.cap file
you have called load and stop. Default is \netlog.
Run cmd
Performs the command selected. For example, to run Netlog and modify the packet size do the following:
Select load from the Commands list and click the Run cmd button.
Select stop from the Commands list and click the Run cmd button.
Select options from the Commands list, enter the new packet size in the Options list and click the Run cmd button.
4-161