Scanner / Imager Aperture
Caution: Never stare directly into the beam aperture.
If Continuous Scan Mode has been enabled (default is disabled), the laser is always on and decoding. Caution: Laser beam
is emitted continuously. Do not stare into the laser beam.
Handle
Handstrap
1. Handstrap
2. Handstrap Retainer Bracket and mounting screws
3. Handstrap Clip
1. Scanner Aperture
2. MX7 Tecton Front
1. Imager / Scanner Aperture
2. Trigger
3. Handle
4. Tether Attach Point
1-5