Mx7T Options; Communication; Enable Tcp/Ip Version 6; Allow Remote Desktop Autologon - Honeywell MX7 Tecton Reference Manual

MX7T Options
Start > Settings > Control Panel > MX7T Options
Set options such as IP V6,
for the Admin and User.
It may be necessary to warmboot the MX7 Tecton after making desired changes. A pop up window indicates if a warmboot is
required.
Note: Contact Technical Assistance

Communication

Options on this tab configure communication options for the MX7 Tecton.

Enable TCP/IP Version 6

By default, IPv6 is disabled on the MX7 Tecton. Check this checkbox to enable IPv6.

Allow Remote Desktop Autologon

By default, Remote Desktop Autologon is disabled. Check this checkbox to enable Remote Desktop Autologon.
Note: The .RDP file must be saved in the \System folder. When prompted, use the Save As button to save the .RDP file is
the \System directry. If the .RDP file is saved in the default root folder location, the .RDP file will not persist across a
warmboot.
time sync, touch screen enable
if there is no icon corresponding to this item in the Control Panel.
and CapsLock. Also set Status Popup taskbar icon display options
4-153