Reboot Sequences; Suspend / Resume; Warmboot - Honeywell MX7 Tecton User Manual

Reboot Sequences

When the desktop is displayed or an application begins, the power up sequence is complete. If you have previously saved your
settings, they will be restored on reboot. Application panel changes are saved when ok is tapped on an application properties
panel.
During the processes that follow there may be small delays while the wireless client connects to the network and Bluetooth
relationships establish or re-establish.

Suspend / Resume

Quickly tapping the Power key places the MX7 Tecton in Suspend mode. Quickly tapping the Power key again, pressing any
key, pressing the trigger (on the trigger handle, if installed), or tapping the touch screen, returns the MX7 Tecton from Suspend.
The System LED blinks green when the video display is Off (and the device is not in Suspend Mode or Critical Suspend).

Warmboot

A warmboot reboots the computer without erasing any registry data. Configuration settings and data in RAM are preserved
during a warmboot. Network and ActiveSync sessions are lost and any data in running applications that had not been
previously saved may be lost. CAB files already installed remain installed.
There are several methods available:
Using the Registry, select Start > Settings > Control Panel > Registry and tap the Warmboot button. The MX7 Tecton
l
immediately warmboots.
Using the Start menu, select Start > Run and type WARMBOOT in the text box. Press Enter. The MX7 Tecton
l
immediately warmboots. The WARMBOOT text command is not case-sensitive.
Using the keypad, press the Ctl key and release it, press the Alt key and release it, press the Del key and release it. The
l
MX7 Tecton immediately warmboots.
Select Start > Settings > System > Registry and click Warmboot. The unit reboots and all programs are re-launched. When the
Today panel is displayed or an application begins, the warm boot sequence is complete.
2-16