Wep - Honeywell MX7 Tecton Reference Manual

WEP

Enter the SSID of the Access Point assigned to this profile
l
Set EAP Type to None
l
Set Encryption to WEP or Manual WEP (depending on SCU version)
l
Set Auth Type to Open
l
Click the WEP keys/PSKs button.
Valid keys are 10 hexadecimal or 5 ASCII characters (for 40-bit encryption) or 26 hexadecimal or 13 ASCII characters (for 128-
bit encryption). Enter the key(s) and click OK.
Once configured, click the Commit button.
Ensure the correct Active Profile is selected on the
after the radio connects to the network.
8-24
Main tab and warmboot. The SCU Main tab shows the device is associated