Furuno NAVpilot-700 Operator's Manual page 80

4. HOW TO CUSTOMIZE YOUR NAVPILOT
Item
[PASSWORD
FUNCTION]
[RECEIVE
SCREEN]
[SAVE USER SET-
TINGS]
[LOAD USER SET-
TINGS]
[SAVE DISPLAY
SETTINGS]
[LOAD DISPLAY
SETTINGS]
[ALARM LOG]
[SIM/DEMO]
[DIAGNOSTIC]
[DISPLAY DATA
SELECT MENU]
[SYSTEM DATA]
4-10
Description
Activates or deactivates pass-
word requirement. Select ON to
require a password to access
menus. If the password is entered
correctly, the menu becomes op-
erative and the option setting for
this item changes to OFF.
For multiple control units, you can
copy the settings of one control
unit to another. When you receive
settings from a control unit of a
different size than own, the fol-
lowing rule applies:1DIN 2DIN
1BOX 2BOXES 2BOXES
3BOXES
Save current settings as user de-
fault settings.
Load user default settings. The
equipment is automatically re-
started to restore saved user set-
tings.
Save all display-related settings.
Load currently saved display-re-
lated settings.
Show the alarms generated. See
section 3.13.
Activate and deactivate the dem-
onstration mode. DO NOT use
this function on board your boat; it
is intended for use by service
technicians. "SIM" appears at the
top right corner when the simula-
tion mode is enabled.
Perform various diagnostics on
the NAVpilot system. See
section 5.3.
Set and select the data to show in
the STBY, AUTO, NAV, WIND,
and FISH HUNTER modes. See
page 1-11 for the procedure.
Show system data. See
section 5.4.
Options
[ON], [OFF]
[NO], 1-6 (actual number de-
pends on number of control
units connected)
[NO], [YES]
[NO], [YES]
[NO], [YES]
[NO], [YES]
[OFF], [DEMO SLIDE
SHOW], [SIMULATOR],
[SIM W/DRIVE].