Alarms; Alarm Menu - Furuno NAVpilot-700 Operator's Manual

3.

ALARMS

Your NAVpilot has nine conditions which generate both audio and visual alarms:
watch alarm, deviation alarm, XTE (cross-track error) alarm, wind alarm (four types,
sailboats only), arrival alarm, speed alarm, depth alarm, water temperature alarm, and
log trip alarm.
When an alarm is violated, the buzzer sounds, and the alarm icon ( ) and a pop-up
message display appear (see section 5.5.3). You can see which alarm(s) has been vi-
olated by opening the Alarm Log, from the [SYSTEM SETUP] menu.
3.1

ALARM Menu

All alarm operations are done from the [ALARM] menu. To show the [ALARM] menu,
do as follows:
1. Press the MENU key to open the menu.
2. Rotate the Course control knob to select [OTHER MENU] then push the knob.
3. Rotate the Course control knob to select [ALARM] then push the knob.
Page 1
BUZZER: INTERNAL
BUZZER INTERVAL:
SHORT
WATCH ALARM: OFF
DEVIATION ALARM:
XTE ALARM: OFF
WIND ALARM*
ARRIVAL ALARM: OFF
* Appears when Ship's Characteristics is
set for "Sailboat".
ALARM
30°
Page 2
SPEED ALARM: OFF
DEPTH ALARM: OFF
TEMP ALARM: OFF
TRIP LOG: OFF
CLEAR TRIP LOG: NO
3-1