2.4
Response Feature
The Response feature provides for simple setting of the NAVpilot's parameters. This
is useful when you need a quick adjustment to counter the effects of wind, etc. This
feature is available in the following conditions:
• AUTO, NAV, WIND and FishHunter modes
• Sea State is set for FULL-AUTO or SEMI-AUTO
2.4.1
How to activate and set the response feature
1. Push the Course control knob to show the RESPONSE window.
2. Push the
3. Rotate the Course control knob to set response level, 1-9. Clockwise rotation:
Raise the response level to get back on course when external interference (wind,
etc.) is pushing the boat off course. Counterclockwise rotation: Lower the re-
sponse level when the NAVpilot is oversteering the rudder.
4. Push the Course control knob to confirm your setting and close the window.
2.4.2
How to deactivate the response feature
1. Push the Course control knob to show the RESPONSE window.
2. Push the
3. Push the Course control knob to close the window.
RESPONSE
AUTO
key to show the following window.
RESPONSE
AUTO
TURN THE KNOB
TO CHANGE VALUE.
key to select [AUTO].
2. STEERING MODES
3
3
2-11