Rigid Pipe Venting Systems - Regency ULTIMATE U39 Owners & Installation Manual

Alternate
Horizontal Ter-
mination Caps
WARNING:
Do not combine venting components from
different venting systems.
However use of the the AstroCap
Riser is acceptable with all systems.
This product has been evaluated by Intertek for
using a Rigid Pipe Adaptor in conjunction with
Duravent Direct-Vent GS, Selkirk Direct-Temp,
Ameri Vent Direct venting and Security Secure
Vent systems. Use of these systems with the
Rigid Pipe adaptor is deemed acceptable
and does not affect the Intertek WHI listing of
components.
The FPI AstroCap TM and FPI Riser Vent terminal are certifi ed for installations using FPI venting systems as well as Simpson Dura-Vent
American Metal Products Ameri Vent Direct Vent, Security Secure Vent
Products International Ltd. Dura-Vent® and Direct Vent GS are registered and/or proprietary trademarks of Simpson Dura-Vent Co. Inc.
Regency ® U39 ULTIMATE Direct Vent Freestanding Gas Stove

RIGID PIPE VENTING SYSTEMS

Horizontal or Vertical Terminations
Vertical
Termination
Cap
Storm Collar
Flashing
Ceiling Firestop
Pipe Length
TM and FPI
Vinyl Siding
Standoff (Optional)
Adj.Pipe Length
11" - 14-5/8"
o
90 Elbow
Pipe
Length
Simpson Dura-Vent, 3 screws must be
® , Selkirk Direct-Temp. AstroCap
INSTALLATION
Horizonta
Termination
(Part # 946-5
Wall Thimble
(only required
in Canada)
When using Rigid Vent other than
used to secure rigid pipe to adaptor.
® Direct Vent GS,
TM is a proprietary trademark of FPI Fireplace
11