Dc Fan; Removing The Dc Fan - Toshiba PORTÉGÉ Z930 Maintenance Manual

4.7

DC fan

Removing the DC fan

To remove the DC fan, follow the steps below and refer to Figure 4-13.
1. Disconnect the fan harness from the connector CN3380 on the system board.
2. Remove the following screws securing the DC fan.
 M2.55C
3. Remove the DC fan from the slot.
M2.5x5C FLAT HEAD
CN3380
PORTÉGÉ Z930/Satellite Z930 Maintenance Manual (960-887)
FLAT HEAD
Fan harness
Figure 4-13 Removing the DC fan
4 Replacement Procedures
2
DC fan
[CONFIDENTIAL] 4-29