Installing The Rtc Battery/Ln Board/3G Card - Toshiba PORTÉGÉ Z930 Maintenance Manual

Installing the RTC battery/LN board/3G card

To install the RTC battery/LN board/3G card, follow the steps below and refer to Figure 4-8
to 4-12.
1. Connect the 3G card to the connector CN2610 on the LN board.
2. Set the LN board to the cover assembly and secure it with the following screws.
 M23B
NOTE: When replacing the LN board with a new one, stick the insulators (INSU HNS
HOLD and INSU HNS BH R) and gasket (WiMAX model only) to the LN board
in place.
WiMAX model only
PORTÉGÉ Z930/Satellite Z930 Maintenance Manual (960-887)
S-THIN HEAD
4 Replacement Procedures
3
[CONFIDENTIAL] 4-27