Installing The Cover Assembly/Lcd Assembly - Toshiba PORTÉGÉ Z930 Maintenance Manual

4 Replacement Procedures

Installing the Cover assembly/LCD assembly

To install the cover assembly/LCD assembly, follow the steps below and refer to Figure 4-23
to 4-25.
1. Set the LCD assembly to the cover assembly and secure them with following screws.
 M2.53C
2. Set the D SUB cover to the cover assembly and secure them with following screw.
 M23B
3. Slide the hinge caps to the cover assembly to secure them while engaging the latches.
4. Arrange the wireless LAN antenna cable (black) and stick the insulator (INSU
ANT HLD) in place.
Prepare the required parts in advance, when replacing the following item.
ITEM
COVER ASSY
4-54 [CONFIDENTIAL]
S-THIN HEAD
S-THIN HEAD
Parts List
ITEM No
60
15
67 TP BTN COVER ASSY
82 FINGER SENSOR BOARD
11
68 INSULATOR KB
PORTÉGÉ Z930/Satellite Z930 Maintenance Manual (960-887)
4
1
PART NAME
COVER ASSY
TOUCH PAD
KEYBOARD
Quantity
1
1
1
1
1
1