3. Take out the DC-IN harness from the slot of the cover assembly and disconnect it
from the connector CN8800 on the system board.
4. Turn up the insulator (INSU W-LAN) and remove the following screw.
M23B
5. Remove the following screw and the system board.
M23B
6. Disconnect the wireless LAN card from the connector CN2600 on the system board.
CN2600
System board
PORTÉGÉ Z930/Satellite Z930 Maintenance Manual (960-887)
S-THIN HEAD
S-THIN HEAD
Figure 4-16 Removing the system board (2)
4 Replacement Procedures
1
1
Wireless LAN card
M2x3B S-THIN HEAD
Insulator
(INSU W-LAN)
DC-IN harness
M2x3B S-THIN HEAD
CN8800
[CONFIDENTIAL]
4-35