4.7 DC fan
4.7
DC fan
Removing the DC fan
To remove the DC fan, follow the steps below and refer to Figure 4-13.
1. Disconnect the fan harness from the connector CN3380 on the system board.
2. Remove the following screws securing the DC fan.
• M2.5×5C
3. Remove the DC fan from the slot.
M2.5x5C FLAT HEAD
CN3380
PORTÉGÉ Z830/835/Satellite Z830 Maintenance Manual (960-883)
FLAT HEAD
Fan harness
Figure 4-13 Removing the DC fan
4 Replacement Procedures
×2
DC fan
[CONFIDENTIAL]
4-29