Installing The Memory Module - Toshiba PORTÉGÉ Z930 Maintenance Manual

Installing the Memory module

To install the memory module, remove the battery pack. Then follow the steps below and
refer to Figure 4-6.
CAUTION: When installing the memory module, make sure the computer is powered off.
Inserting a memory module with the power on might damage the module or
the computer itself.
Never press hard or bend a memory module.
1. Insert the memory module into the connector slantwise and press it down to connect
firmly.
CAUTION: After installing the memory module, make sure that the memory module is
secured with the left and right latches.
2. When the power of the computer is turned on, the computer checks automatically the
memory size. Confirm that the new memory is detected correctly.
3. If the memory is not detected, check if it is connected correctly.
PORTÉGÉ Z930/Satellite Z930 Maintenance Manual (960-887)
4 Replacement Procedures
[CONFIDENTIAL] 4-19