Usb Port Select Menu - Toshiba PORTÉGÉ Z930 Maintenance Manual

[Touch Pad On/OFF Button test]
Press [Touch Pad On/OFF] Button
Please press Touch Pad On/OFF button
After checking Touch, return to the ONLY ONE TEST menu automatically.
Subtest 03

USB port select menu

NOTE: When executing this subtest, USB test module and USB cable must be
connected.
This subtest checks if USB port works properly.
The following menu appears in the display.
########
#################################################################
*
* 0 ............
* 1 ............
* 2 ............
* 9 ............
*
*****************************************************************
.... Press test number [0-2, 9] ?
Connect the USB test module and USB cable to the computer.
Input the port test number and press Enter.
OK message appears in the display if the test ends without a defective.
NG message appears in the display if a defective is found during the test.
Confirm the connection of cable, then execute the test again.
Press 9 and return to ONLY ONE TESST menu.
PORTÉGÉ Z930/Satellite Z930 Series Maintenance Manual (960-887)
USB Port Select (XXXXXXXXX)
Port 0 (Right in the back side)
Port 1 (Left in the back side)
Port 2 (Right side)
EXIT
Tests and Diagnostics
########
[CONFIDENTIAL]
*
*
*
*
*
*
3-51