Toshiba PORTÉGÉ Z930 Maintenance Manual page 326

4 Replacement Procedures
5. Peel off the aluminum tape (AL TAPE) and peel off the fingerprint sensor board.
NOTE: Do not reuse the removed fingerprint sensor board. Be sure to use a new
fingerprint sensor board.
In the models without the fingerprint sensor board, peel off the AL TAPE
NONFINGER.
Fingerprint sensor Aluminum
board tape
Figure 4-20 Removing the touch pad/fingerprint sensor board (3)
PORTÉGÉ Z930/Satellite Z930 Maintenance Manual (960-887) [CONFIDENTIAL] 4-43