4 Replacement Procedures
Screw Tightening Torque
When you fasten screws, be sure to follow the torque list below.
CAUTION: Overtightening can damage components and screws; undertightening can
result in electrical shorts or other damage if screws or components come
loose.
NOTE: Toshiba recommends that you use an electric screwdriver for quick and easy
operations.
M2 (2mm)
M2.5 (2.5mm)
NOTE: To prevent damage to THIN HEAD screws, use type 0 bit philips screwdriver.
Press along the axis of the screwdriver while turning the screw. This is because
the contact area between the screw and driver is less than for a pan head screw
(standard pan-shaped screw head).
4-8
[CONFIDENTIAL]
0.167 N·m(1.7 kgf·cm)
0.294 N·m(3.0 kgf·cm)
PORTÉGÉ Z930/Satellite Z930 Maintenance Manual (960-887)