Table of Contents
Advertisement
Physical Interface & Button
Front Panel LED Indicators
LED
State
ON
PWR
Off
ON
Flashing
WAN
Off
ON
Flashing
LAN
Off
ON
WPS
Off
Flashing
WLAN
Off
ON
Flashing
Phone
Off
Reset Button
WPS Button
Rear Panel Indicators
1
WAN
2
LAN
3
FXS
4
12V DC
5
Antenna
1. Machine LAN port default IP is http://192.168.0.1. Press
RESET button on front panel over 5 seconds will reset the
Note
VoIP Router to factory default value. (Except speed dial and
call forward settings)
2. Using the power supply that is not the one included in package
will cause damage and void the warranty for this product.
Router is power ON
Router is power Off
Router network connection established
Data traffic on cable network
Waiting for network connection
LAN is connected successfully
Data is transmitting
Ethernet not connected to PC
The Wi-Fi Protected Setup function is starting.
The Wi-Fi Protected Setup function is close
Transmitting or receiving data through the Wireless LAN
Wireless LAN is no function
Telephone Set is On-Hook
Ring Indication
Telephone Set is Off-Hook
- Pressing 1 second to reboot machine.
- Pressing 5 seconds to reset to the factory default setting
- Pressing 3 seconds to start the WPS function 2 minutes for client
connection.
- Pressing 10 seconds to enable or disable the wireless function.
RJ-45 connector for Internet access, connected directly to
Switch/Hub through straight CAT-5 cable.
RJ-45 connector, to maintain the existing network structure,
connected directly to the PC through straight CAT-5 cable
RJ-11 connector, connected directly to the analog phone.
12V DC Power input outlet
Used to connect the external antenna for accessing to 802.11b/g/n
wireless network
- 8 -
Descriptions
Advertisement
Table of Contents
