Table of Contents
Advertisement
LAN Interface Setup
This page is used to configure the parameters for local area network which connects to the LAN port of
your Gateway. Here you may change the setting for IP address, subnet mask, DHCP, etc..
IP Address
Subnet Mask
DHCP Server
DHCP Client Range
Static DHCP
LAN IP Address of the Router
Default : 192.168.0.1
LAN mask of the Router
Default : 255.255.255.0
You can select Server or Disable. If you select Disable, the
DHCP service of LAN port is disabled.
Default : Server
The first and last IP address that DHCP server assigns.
Default : 192.168.0.100 – 192.168.0.200
It allows you reserve IP addresses, and assign the same IP
address to the network device with the specified MAC address
any time it requests an IP address
Default : Disable
- 21 -
Advertisement
Table of Contents
