Planet VIP-281SW User Manual page 44

- SIP Advanced
SIP Port
Media Port
DMTF Relay
RFC2833 Payload Type
SIP INFO Duration (ms)
Call Waiting
Call Waiting Caller ID
Reject Direct IP Call
Set local SIP listening port.
Default : 5060
Set RTP port for sending voice data.
Default : 9000
Select DTMF Relay to be In band, RFC 2833, or SIP INFO.
Default : Inband
If user select DTMF as RFC 2833 type, here can modify RFC
2833 payload type.
Default : 96
If user select DTMF as SIP INFO type, here can modify SIP
INFO duration. Router will send out DTMF as this duration.
Default : 250
Check to enable Call Waiting function.
Default : Enable
Check to enable call waiting caller ID function. If this function is
enabled, caller ID will display when having waiting call. Please
note that your phone set should also support such function.
Default : Disable
Check to enable Reject Direct IP Call. If this function is enabled,
Router will to reject the incoming peer to peer call.
Default : Disable
- 44 -