Planet VIP-281SW User Manual page 19

PPPoE
User Name
Password
Service Name
Connection Type
Idle Time
After confirming the modification you've done, please click on the Apply button to apply settings
effective and the Router will be reload page automatic by itsely, that you must to afresh enter the final
modification IP address for logon web management.
Connection Type Description – PPTP/L2TP
Set WAN interface as PPPoE mode.
Set user name of PPPoE connection
Default : Null
Set password of PPPoE connection
Default : Null
Set Service Name of PPPoE for description
Default : Null
Set PPPoE connection type to be Continuous/ Connect on Demand/
Manual. If user set type as Continuous, Router will keep trying to
connect to server when PPPoE disconnect. If user set type as Connect
on Demand, please set following idle time, Router will check
connection after this time. If user set type as Manual, Router will only
connect or disconnect by press Connect or Disconnect manually.
Default : Continuous
Set PPPoE connection idle time for Connect on Demand.
Default : 5
- 19 -