Planet VIP-281SW User Manual page 20

PPTP
Mode
IP Address
Subnet Mask
Gateway
Server IP Address
User Name
Password
Please be noticed that the Utility Tool is only designed
Note
for the WAN environment setting. If the "Connect Type" is
"PPPoE", the Utility Tool can NOT find the device.
Set LAN interface as PPTP/L2TP mode.
Set IP type if Dynamic IP or Static IP at PPTP/L2TP connection.
Default : Dynamic IP
WAN IP Address of the Router at Static IP type.
Default : 0.0.0.0
WAN Mask of the Router at Static IP type.
Default : 0.0.0.0
Gateway of the Router
Default : 0.0.0.0
Set PPTP/L2TP Server IP address.
Default : 0.0.0.0
Set user name of PPTP/L2TP connection
Default : Null
Set password of PPTP/L2TP connection
Default : Null
- 20 -