Wan Setup; Wan Interface - Planet WNRT-633 User Manual

Bridge
Wireless ISP

5.3 WAN Setup

You can configure WAN connection type manually here just like it in Setup Wizard, and set advanced
functions like DDNS (Dynamic DNS) here.

5.3.1 WAN Interface

This page is used to configure the parameters for Internet network which connects to the WAN port of
your Wireless Router. Here you may change the access method to static IP, DHCP, PPPoE, PPTP or
L2TP by clicking the item value of the WAN Access type.
Choose menu "WAN Setup  WAN Setup", and you can configure the parameters for the Internet
network. After the configuration, please click the "Apply" button to save the settings.
In this mode, the device can be used to combine multiple local
networks together to the same one via wireless connections, especially
for a home or office where separated networks can't be connected
easily together with a cable.
In this mode, the device enables multiusers to share Internet from
WISP. The LAN port devices share the same IP from WISP through
Wireless port. While connecting to WISP, the Wireless port works as
a WAN port at AP Client Router mode. The Ethernet port acts as a
LAN port.
-34-
User's Manual of WNRT-633