Appendix A Voice Communication Samples; Peer To Peer (P2P) Mode - Planet VIP-281SW User Manual

Appendix A Voice communication samples

There are several ways to make calls to desired destination in Router. In this section, we'll lead you
step by step to establish your first voice communication via keypad and web browsers operations.

Peer to peer (P2P) mode

Assuming there are two routers in the network, the WAN port IP address are 192.168.0.1
and 192.168.0.2
Test the scenario:
1. To Phone A: Other Phone dials "192*168*0*1#".
2. To Phone B: Other Phone dials "192*168*0*1**5062#".
3. To Phone C: Other Phone dials "192*168*0*2#".
4. To Phone D: Other Phone dials "192*168*0*2**5062#".
If the IP address of the remote calling party is known,
you may directly make calls by preset number via its IP
address and end with "#".
Hint
If the VoIP Router is installed behind a NAT/firewall/
IP sharing device, please make sure the NAT device
support SIP applications before making calls.
The voice communication need to go through via WAN port
of router, so it needs to make sure the WAN port connector
is properly for communication.
- 64 -