Planet VIP-281SW User Manual page 11

Factory Reset
#198#
Following keypad commands can be used to display the network settings enabled on Router via voice
prompt.
IVR Menu Choice
Check LAN port IP Address
#120#
Check WAN port IP Address
#126#
Check network connection Type
#121#
Check the Phone Number
#122#
Check Network Mask
#123#
Check Gateway IP Address
#124#
Check DNS Server Setting
#125#
Check Firmware Version
#128#
Following keypad commands can be used to set up the main function .
IVR Menu Choice Machine operation
#130+first
Set First Priority Codec
priority codec
Set Speaker Voice Gain
#133#
Set Mic Voice Gain
#134#
Enable call waiting
#138#
None
Machine operation
Parameter(s)
01: G.711 u-Law, 02:
G.711 a-Law, 03: G.729,
04: G.723 6.3K, 05:
G.723 5.3K, 06: G.726
16K, 07: G.726 24K, 08:
G.726 32K, 09: G.726
40K, 10: GSM-FR, 11:
G.722
00~31, 32: Mute
00~31, 32: Mute
None
- 11 -
The system will be reset to
factory default value and
reboot automatically.
Notes
IVR will announce the current IP address of
the LAN port.
IVR will announce the current IP address of
the WAN port.
IVR will announce if DHCP in enabled or
disabled. (WAN port)
IVR will announce current enabled VoIP
number. (WAN port)
IVR will announce the current network mask
of the Router. (WAN port)
IVR will announce the current gateway IP
address of the Router. (WAN port)
IVR will announce the current setting in the
DNS field. (WAN port)
IVR will announce the version of the
firmware running on the Router.
Notes
You can set the codec you
want to the first priority.
For example: #13001#
Set G.711 u-Law to the first
priority codec
For example: #13305#
Mic Voice: 5
For example: #13410#
Mic Voice: 10
Enable Call waiting