Getting Started; Logging On - 3Com SuperStack II PathBuilder S330 Reference Manual

3

Logging On

G S
ETTING
This chapter tells you how to initialize and prepare SuperStack II PathBuilder S330
and SuperStack II PathBuilder S310 WAN access switches (PathBuilder S330/S310
switch) for operation and how to use the PathBuilder S330/S310 menus. It
contains the following sections:
Logging On
Using the Menus
Performing Initial System Configuration
Performing Additional Super User Functions
Configuring In-band Management
You enter initial configuration information via the local user interface. This
interface is presented on a VT100 terminal connected to the RS-232 (console) port
on the front of the PathBuilder S330/S310 switch, as shown in Figure 36. See
Chapter 2 for details about connecting the VT100 terminal.
Set the terminal for the following:
9600 baud
no parity
8 data bits
1 stop bit
TARTED