Table of Contents
Advertisement
Viewing MCPU Card
Statistics
Viewing T1/E1 UNI with
IMA Card Statistics
To view MCPU statistics:
1 From the Card Statistics menu, shown earlier in Figure 161, select the option
corresponding to the MCPU to open the MCPU Performance menu.
2 Select [1] MCPU-Performance to view MCPU performance statistics or [2]
ATM-Inband to view in-band statistics.
You can view T1/E1 UNI with IMA statistics for ports or for groups.
To view T1/E1 statistics:
1 From the Card Statistics menu, shown earlier in Figure 161, select the option
corresponding to the T1/E1 UNI with IMA module to open the T1/E1 UNI
Performance menu.
2 Select [1] Port/Link Performance Management to view port statistics or [2] Group
Performance Management to view group statistics.
3 Enter the number corresponding to the port or group for which you want to view
statistics.
4 Select the option corresponding to the type of statistics you want to view.
Port statistics
PHY (Physical) Performance Monitoring
UNI LInk ATM Statistics (available only when port is not part of an IMA
group)
IMA Link Performance Monitoring (available only when port is part of an
IMA group)
IMA Link ATM Statistics (available only when port is part of an IMA group)
Group statistics
Group Performance Monitoring (available only for IMA groups)
Group ATM Statistics
The following sections describe the statistics provided in each of these categories.
For performance monitoring statistics only, you must select the type of
performance statistics you want to view: current, interval, or total. For details
about these types of performance statistic, see "Viewing Performance and ATM
Statistics" earlier in this chapter.
Viewing Performance and ATM Statistics
187
Advertisement
Table of Contents
