Table of Contents
Advertisement
To view the video call routing table:
1 From the Configuration Management menu, select [5] Manage Video Dial to open
the Manage Video Dial menu, shown earlier in Figure 144.
2 From the Manage Video Dial menu, select [1] Display Video Call Routing Table to
display the Video Call Routing Table, shown in Figure 147.
Each row in the video call routing table corresponds to a video-associated virtual
circuit (call) between PathBuilder S330/S310 CBR modules. The table provides the
following information for each entry:
Index — A unique number identifying this entry in the call routing table.
Dest Phone # — The destination phone number associated with this call.
Tx VPI/VCI — The trunk transmission VPI/VCI associated with this call.
Rx VPI/VCI — The trunk receiving VPI/VCI associated with this call.
Speed — The speed of the call, in kbps.
Status — The status of the call: idle or active.
Figure 147 Video Call Routing Table
Advertisement
Table of Contents
