So-Dimm Module Removal; Positioning The Lcd Panel - NEC POWERMATE 2000 Service And Reference Manual

SO-DIMM Module Removal

Remove the SO-DIMM module(s) as follows.
1. Close all applications, shut down the operating system, turn off system
power, and unplug the AC power adapter and power cord from the power
source and the back of the system unit.
2. Turn off and disconnect all peripherals.
3. Carefully position the system with the LCD panel swiveled to the right, as
shown in the following figure.

Positioning the LCD Panel

Disassembly and Reassembly 3-5