Network Board Specifications; Network Board - NEC POWERMATE 2000 Service And Reference Manual

Pentium iii processor-based series
Hide thumbs Also See for POWERMATE 2000:
Table of Contents

Advertisement

Feature
Chip Set
Total System Memory (system and
video)
Optional SO-DIMMs
CMOS Battery

Network Board

The network board specifications are included in the following table.
Feature
Network Board
Supports
Voltage
9-6 Specifications
System Board Specifications
Specification
Intel i810 chipset with
82810 Graphics Memory Controller Hub
Dynamic Video Memory Technology
System Manageability Bus
82801 I/O Controller Hub
Integrated Audio-Codec 97 Controller
82802 Firmware Hub
64 MB to 256 MB in one or two SO-DIMM sockets on system
board
64-MB and 128-MB ,168-pin, 64-bit (non-ECC) SO-DIMMs
Replaceable coin-type battery

Network Board Specifications

Specification
NEC
Intel 82559 controller chip
10Base-T/100Base-TX, with support for Wake-On LAN and AOL2
32-bit PCI master interface
Interface for LAN connector board
Advanced Configuration and Power Interface (ACPI) Power
Management
PCI 2.2/PC98/PC99 compliance
Advanced System Management Bus (SMB)
Full duplex support at both 10 Mbps and 100 Mbps
Low power 3.3 Volts

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powermate 2000 series

Table of Contents