Custom Rebuild And Restore - NEC POWERMATE 2000 Service And Reference Manual

6. Remove the CD from the CD tray.
7. Click
OK
This completes the Auto Rebuild and Restore procedure.
See "NEC Application and Driver CD" for instructions on installing any of the
applications or online documents, or to install device drivers that did not come
with the system.
Restore any application or driver that was not provided by NEC by using the
vendor diskette(s) or CD-ROM(s) included in its original packaging.

Custom Rebuild and Restore

Format the hard drive with choices on repartitioning the drive as follows.
1. Launch the NEC OS Restore CD and follow the prompts to get to the
Restore Mode screen (see "Launching the OS Restore CD").
2. Click
Custom
reinstalling the operating system. After clicking
system's existing FAT table is verified.
!
If the table is functional, a Partitioning the Hard Drive screen appears
with options allowing you to retain the present partition structure or
partition the hard disk using FAT16 or FAT32.
!
If the existing partition table is not functional, the system performs an
"Auto" restore as described in "Auto Rebuild and Restore."
3. If partitioning and reformatting the hard drive, go to step 6. Otherwise, click
to retain the present partition structure on the hard drive. The Format
Skip
Mode screen appears with four options: Back, Quick, Full, and Exit.
!
Click
!
Click
!
Click
!
Click
4. After selecting the type of hard drive format you want to do (Quick or Full),
the Formatting Drive(s) screen appears with a status bar showing the
progress of the formatting.
After the drive is reformatted, the Installing Applications screen appears,
indicating the status as the operating system loads from the CD.
The drivers and other software components required for the operating
system are also loaded from the CD.
After the OS finishes loading, the "Operating System Restore Completed"
screen appears. Go to step 6.
to reboot.
to repartition and/or reformat the hard drive before
Back to return to the Partition Information screen.
Quick to do a quick hard drive format.
to do a full hard drive format.
Full
to terminate the restore process.
Exit
, the integrity of the
Custom
System Configuration 2-29