Checking System Memory; Installing A Dimm Module - NEC POWERMATE CT 815 Manual

Sample DIMM Upgrade Paths
Total Memory*
512 MB
512 MB
512 MB
*The information in this table shows sample DIMM upgrade paths. It does
not represent every combination of DIMMs supported in the system.

Checking System Memory

If you do not know how much memory is installed in your system, check
the amount by using the following procedure.
1. On the Windows desktop, point to
mouse button.
With the left mouse button, click
2.
the random access memory (RAM). This is the amount of memory in
your system.
In Windows 98 or Windows 2000, you can also find the amount of
memory by pointing to
clicking
Properties

Installing a DIMM Module

Use the following steps to install a DIMM module.
Remove the cover (see "Removing the Cover").
1.
2. If you need to remove a currently installed DIMM module, see
"Removing a DIMM Module" later in this section.
discharge by touching the chassis.
4-18 Installing Options
DIMM 1 DIMM 2
256 MB 128 MB
256 MB 256 MB
512 MB Empty
My Computer
Properties
, clicking the right mouse button,
My Computer
, and clicking the
Performance
Before you install a module, reduce static
DIMM 3
128 MB
Empty
Empty
, and click the right
. The tab shows
General
tab.