Daikin Super Multi NX C-Series Service Manual page 143

Instruction
" To 3-D Airflow
1. 3. press "SWING button": the "
" To cancel 3-D Airflow
2. 4. press "SWING button"
Notes on louvres angles
" ATTENTION
Notes on flap angle
" ATTENTION
132
move in turn.
• Always use a remote control to adjust the louvres angles. In side the air outlet, a fan is rotating
at a high speed.
• When "SWING button" is selected, the flaps swinging
range depends on the operation mode. (See the figure.)
Three-Dimensional (3-D) Airflow
• Using three-dimensional airflow circulates cold air, which
tends to collected at the bottom of the room, and hot air,
which tends to collect near the ceiling, throughout the
room, preventing areas of cold and hot developing.
• Always use a remote control to adjust the flaps angle.
If you attempt to move it forcibly with hand when it is
swinging, the mechanism may be broken.
" " " display will light up and the flaps and louvres will
SiE12-411
In COOL or DRY mode
STOP
COOL
approx. 10˚~40˚
DRY
approx. 5˚~35˚
In HEAT or FAN mode
STOP
HEAT
approx. 15˚~55˚
FAN
approx. 5˚~55˚
System Configuration