Daikin Super Multi NX C-Series Service Manual page 136

SiE12-411
" To operate the remote control
•
•
•
"
To fix the remote control holder on the wall
1. Choose a place from where the signals reach the unit.
2. Fix the holder to a wall, a pillar, etc. with the screws
3. Place the remote control in the remote control holder.
ATTENTION
" About remote control
System Configuration
To use the remote control, aim the transmitter at the indoor
unit. If there is anything to block signals between the unit
and the remote control, such as a curtain, the unit will not
operate.
Do not drop the remote control. Do not get it wet.
The maximum distance for communication is about 7 m.
supplied with the holder.
• Never expose the remote control to direct sunlight.
• Dust on the signal transmitter or receiver will reduce the sensitivity. Wipe off dust with soft
cloth.
• Signal communication may be disabled if an electronic-starter-type fluorescent lamp (such as
inverter-type lamps) is in the room. Consult the shop if that is the case.
• If the remote control signals happen to operate another appliance, move that appliance to
somewhere else, or consult the shop.
Instruction
Receiver
Remote control
holder
Set.
To remove, pull it upwards.
125