Fiat Panda Owner's Handbook Manual page 39

A Air temperature knob (red=hot/blue=cold)fig. 29
B Air recirculation knob fig. 29
internal air recirculation
air intake from outside
IMPORTANT It is advisable to switch the air
recirculation on whilst queuing or in tunnels, or
whilst driving on dusty roads, to prevent the
introduction of polluted air. However, it is better not
to use the function for long periods, particularly if
there are many people on board, to prevent the
windows from misting.
C Air distribution knob fig. 29
towards the body and the side windows
towards the body, the side windows and the feet
toward the feet mainly
towards the feet and the windscreen
towards the windscreen only
D Heated rear window, folding mirror/heated
windscreen (for versions/markets, where available)
activation/deactivation button fig. 29.
The LED on the button lights up to indicate
activation.
In order to maintain battery efficiency, the function is
automatically deactivated after about 20 minutes.
E Fan speed and climate control system activation/
deactivation knob fig. 29 (for versions/markets,
where provided). Press the knob to activate
the climate control system; the LED on the knob
switches on. This enables rapid cooling of the
passenger compartment. .
Note To stop the air flow from the vents turn the
knob to 0.
PASSENGER COMPARTMENT
VENTILATION
To ventilate the passenger compartment well,
proceed as follows:
❒ turn knob A fig. 29to the blue section;
❒ Turn selector B to external air recirculation
;
❒ turn knob C to
;
❒ turn knob E to the desired speed.
CLIMATE CONTROL (cooling - for
versions/markets, where provided)
For fast cooling of the passenger compartment,
proceed as follows:
❒ turn knob A fig. 29to the blue section;
❒ turn knob B to internal air recirculation
❒ turn knob C to
;
GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
;
INDEX
35