Fiat Panda Owner's Handbook Manual page 131

STARTING PROCEDURE FOR DIESEL
VERSIONS
Proceed as follows:
❒ engage the handbrake and place the gearbox lever
in neutral;
❒ turn the ignition key to MAR-ON: the warning
lights and on the instrument panel will
turn on;
❒ wait for the warning lights
off;
❒ fully press the clutch pedal without touching the
accelerator;
❒ turn the ignition key to AVV as soon as warning
light switches off. Waiting too long will waste
the heating work carried out by the plugs. Release
the key as soon as the engine starts.
IMPORTANT With cold engine, the accelerator must
be entirely released when turning the ignition key
to position AVV.
If the engine does not start at the first attempt,
return the ignition key to STOP before repeating the
procedure.
If, when the ignition key is at MAR-ON the
warning light remains lit, turn the key to STOP
and then back to MAR-ON; if the warning light
remains lit, try with the other keys provided with the
car.
Contact the Fiat Dealership if the engine still will not
start.
plug heating system.You can use the car as usual
if the engine starts but you should contact a
Fiat Dealership as soon as possible.
and to switch
in oxygen and releases carbon dioxide, carbon
monoxide and other toxic gases.
the engine has been started, therefore much
effort than usual is required on the brake pedal
and steering wheel.
acceleration, long journeys at top speed, sharp
braking etc.).
Warning light will flash for 60 seconds
after starting or during prolonged
cranking to indicate a fault with the glow
WARNING
It is dangerous to run the engine in
enclosed areas.The engine takes
WARNING
Remember that the brake servo and
power steering are not operational until
We recommend that during the initial
period you do not demand to full
performance from the car (e.g. excessive
GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
127