Fiat Panda Owner's Handbook Manual page 110

The amber warning lights operate as follows:
GETTING TO KNOW
❒ 1 = front left seat (driver status for left-hand drive
YOUR CAR
versions);
❒ 2 = rear left seat (passenger) (for versions/markets
where provided);
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
fig. 89
106
❒ 3 = rear centre seat (passenger) (for versions/
markets where provided);
❒ 4 = rear right seat (passenger) (for versions/
markets where provided).
❒ 5 = front right seat (passenger status for left-hand
drive versions).
Front seats (warning light no. 1 = driver and
no. 5 = passenger)
Driver
If the driver is the only occupant and their seat belt
is not fastened, when 20 km/h is exceeded or when
travelling at a speed between 10 and 20 km/h for
longer than 5 seconds, an acoustic signal cycle will be
started for the front seats (continuous acoustic
signal for 6 seconds followed by a 90 second beep).
The warning light will flash. Once the cycle is
complete, the warning lights stay on with a fixed light
until the car is turned off or the seat belt fastened.
If the seat belt is unfastened again while travelling,
the acoustic reminder resumes as described
previously and icon A
Passenger
A similar situation applies to the front passenger. The
indication is also interrupted when the passenger
leaves the car.
If both front seat belts are unfastened while the car
is travelling a few seconds apart, the acoustic
indication will refer to the most recent event and the
F0W0225
fig. 89 switches on.