Eq Function; User Eq Settings Function - Fiat Panda Owner's Handbook Manual

EQ FUNCTION

(equaliser activation/deactivation)
The built-in equaliser can be activated/deactivated.
When the equaliser function is off, the audio settings
can only be changed by adjusting the "Bass" and
"Treble" settings, whereas when the function is on,
the acoustic curves can be adjusted. To turn off the
equaliser, select the "EQ OFF" function using the
or buttons.
To turn the equaliser on, use the
select one of the adjustments:
❒ "FM/AM/CD...EQ User" (adjustment of 7 equaliser
bands that can be changed by the user);
❒ "Classic" (equaliser preset for optimal classical
music sound);
❒ "Rock" (equaliser preset for optimal rock and pop
music sound);
❒ "Jazz" (equaliser preset for optimal jazz music
sound).
When one of the equaliser settings is activated the
letters "EQ" light up.

USER EQ SETTINGS FUNCTION

(equaliser settings only if the USER setting has
been selected)
To set a customised equaliser adjustment, move to
"User" using the
MENU button.
A 7-bar graph appears on the display, in which each
bar represents a frequency.
Select the bar to adjust using the
or buttons to
selected bar will start to flash and it can be adjusted
using the
To store the setting, press the
display will show the source activated at that time
followed by the text "User". If the mode is "FM" the
display will show the text "FM EQ User".
or buttons and press the
or
or buttons.
button again. The
buttons; the
251