Menu Items - Fiat Panda Owner's Handbook Manual

MENU ITEMS

GETTING TO
Menu
KNOW YOUR CAR
This option allows you to access the Setup Menu.
Press the
various Menu items. Hold down the
SAFETY
return to the standard screen.
Lighting (Interior car lighting adjustment)
(with side lights on only)
STARTING AND
DRIVING
With the side lights on, this function is used to set
the brightness of the instrument panel, radio
controls and automatic climate control system
WARNING LIGHTS
controls (for versions/markets, where provided) to 8
AND MESSAGES
levels.
To adjust the brightness, proceed as follows:
press the
IN AN EMERGENCY
will flash on the display;
press the
level;
SERVICING AND
press the
MAINTENANCE
screen or hold the button down to return to the
standard screen without storing.
Speed Beep (Speed limit)
TECHNICAL
SPECIFICATIONS
This function is used to set the car speed limit (km/h
or mph); the driver is alerted when this limit is
exceeded.
INDEX
10
or fig. 7 button to select the
button briefly: the previously set level
or button to adjust the brightness
button briefly to return to the menu
To set the desired speed limit, proceed as follows:
❒ briefly press the
the text (Speed Beep);
❒ press the
activation (On) or deactivation (Off);
button to
❒ if the function is on, press
desired speed limit and then press
Note Setting is possible between 30 and 200 km/h,
or 20 and 125 mph, according to the previously
set unit. See the "Measurement unit adjustment
(Measurement unit)" paragraph described below. The
setting will increase/decrease by 5 units each time
the
/
the setting rapidly. Complete the adjustment with
single presses of the button when you approach the
desired value.
❒ press the
screen or hold the button down to return to the
standard screen without storing.
To cancel the setting, proceed as follows:
❒ press the
display;
❒ press the
display;
❒ press the
screen or hold the button down to return to the
standard screen without storing.
button: the display will show
or button to select speed limit
or
/ button is pressed. Hold down the
button to automatically increase/decrease
button briefly to return to the menu
button briefly: "On" will flash on the
button: "Off" will flash on the
button briefly to return to the menu
to select the
to confirm.