Selecting Mp3 Sessions On Hybrid Discs - Fiat Panda Owner's Handbook Manual

The operating conditions and specifications for
playing MP3 files are as follows:
❒ the CD-ROMs used should be burnt according to
the ISO 9660 standard;
❒ the music files must have an ".mp3" extension: files
with a different extension cannot be played;
❒ the following sampling frequencies can be played:
44.1 kHz, stereo (96 to 320 kbit) - 22.05 kHz,
mono or stereo (32 to 80 kbit);
❒ tracks with a variable bit-rate can be reproduced.
Note
The names of tracks must not contain the following
characters: spaces, ' (apostrophes), ( and ) (open and
close brackets). During the burning of a MP3 CD,
make sure that the names of the files do not contain
these characters; if they do, the radio will not be able
to play the tracks involved.
264
SELECTING MP3 SESSIONS ON HYBRID
DISCS
If a hybrid disc is inserted (Mixed Mode, Enhanced,
CD-Extra) also containing MP3 files, the radio
automatically starts playing the audio session. It is
possible to switch to the MP3 session whilst playing
by holding the MEDIA button down for more than 2
seconds.
Note
When the function is activated the radio may take a
few seconds to start playing. Whilst checking the disc
the display will show "CD Reading". If no MP3 files
are detected, the radio will resume playing the audio
session from the point where it was interrupted.