Cd Player; Introduction; Selecting The Cd Player; Loading/Ejecting A Cd - Fiat Panda Owner's Handbook Manual

CD PLAYER

INTRODUCTION

This section describes the variants regarding the
operation of the CD player: as far as the operation of
the radio is concerned, refer to the description in the
"Functions and Adjustments" chapter.

SELECTING THE CD PLAYER

To activate the CD player built into the equipment,
proceed as follows:
❒ insert a CD with the equipment switched on: the
first track will start to play;
or
❒ if a CD has already been loaded, turn on the car
radio and then briefly press the CD button to
select the "CD" operating mode: the last track
listened to will start to play.
It is advisable to use original CDs to ensure optimum
playback. If CD-R/RWs are used, we recommend
using good quality media that are burnt at the
slowest speed possible.

LOADING/EJECTING A CD

To load the CD, insert it gently into the slot to
activate the motorised loading system, which will
position it correctly.
The CD can be loaded with radio off and the ignition
key turned to MAR: in this case the radio will remain
off. When the radio is turned on, the last source
listened to before being switched off will be
activated.
When a CD is inserted the display will show the
symbol "CD-IN" and the text "CD Reading". They
will remain displayed for the entire time required for
the radio to read the CD tracks. When this time has
elapsed the radio automatically starts playing the first
track.
Press the button (EJECT) with the radio on to
activate the motorised ejection of the CD. After
ejection, the last audio source listened to before
playing the CD will be heard.
WARNING
Do not inadvertently press the eject
button when inserting a CD.
261