Fiat Panda Owner's Handbook Manual page 154

JACK
GETTING TO KNOW
Important notes:
YOUR CAR
❒ the jack weight is 1.76 kg;
❒ the jack requires no adjustment;
❒ the jack cannot be repaired and in the event of a
SAFETY
fault it must be replaced by another original one;
❒ no tool other than its cranking device may be
fitted on the jack.
STARTING AND
To change a wheel proceed as follows:
DRIVING
❒ stop the car in a position that is not dangerous for
oncoming traffic where you can change the wheel
safely. The ground must be flat and sufficiently
WARNING LIGHTS
compact;
AND MESSAGES
❒ switch off the engine, pull up the handbrake and
engage the 1
reflective safety jacket (compulsory by law in
IN AN
certain countries) before getting out of the car;
EMERGENCY
❒ open the luggage compartment, pull tab A fig. 108
and lift up the mat;
SERVICING AND
❒ using the wrench A fig. 109 located in the tool
MAINTENANCE
box, loosen the locking device, take the tool box B
and place it close to the wheel to be replaced.
Then take the space-saver wheel C;
TECHNICAL
SPECIFICATIONS
INDEX
150
st
gear or the reverse gear. Wear the
❒ take the wrench A fig. 110 and loosen the fixing
bolts by about one turn;
❒ position the jack under the car, near the wheel to
be changed;
fig. 108
fig. 109
F0W0325
F0W0183