Regional Mode Function; Mp3 Display Function - Fiat Panda Owner's Handbook Manual

If the volume is changed during traffic news, the level
will not be shown on the display; the new level will
only be maintained during the news.
While traffic information is being received, "TRAFFIC
INFORMATION" will appear on the display.
The TA function can be interrupted by pressing any
button on the car radio.

REGIONAL MODE function

(regional transmission reception)
Some national broadcasters will transmit regional
programmes at certain times of the day (that vary
from region to region).
This function makes it possible to tune into local
(regional) broadcasters automatically (see "EON
function" paragraph).
If you want the radio to automatically tune into the
regional stations being broadcast on the selected
network, the function must be activated.
To activate/deactivate the function use the
buttons.
The current status of the function appears on the
display:
❒ "Regional On": function activated;
❒ "Regional Off": function deactivated.
If the function is deactivated and you have tuned into
a regional station working in a given area and you
enter a different area, then the regional station
received in the new area will be broadcast.
254
Note
If the AF and REG functions are on at the same time,
once a border between two regions is crossed, the
radio may not switch correctly to a valid alternative
frequency.

MP3 DISPLAY function

(MP3 CD data display)
This function makes it possible to select the
information shown by the display when listening to a
CD containing MP3 tracks.
The function can only be selected if an MP3 CD is
inserted: in this case "MP3 Display" will appear on the
display.
To change the function, use the
The following settings are available:
❒ "Title" (track title, if the ID3-TAG is available);
❒ "Author" (track author, if ID3-TAG is available);
❒ "Album" (track album, the ID3-TAG if available);
or
❒ "Folder" name (name assigned to the folder);
❒ "File" name (name assigned to the MP3 file).
or buttons.