Fiat Panda Owner's Handbook Manual page 16

Set date (Setting the date)
GETTING TO
This function can be used to set the date (year -
KNOW YOUR CAR
month - day).
To carry out the adjustment, proceed as follows:
❒ briefly press the
SAFETY
the display;
❒ press the
adjustment;
STARTING AND
❒ press the
DRIVING
on the display;
❒ press the
adjustment;
WARNING LIGHTS
❒ briefly press the
AND MESSAGES
the display;
❒ press the
adjustment;
IN AN EMERGENCY
❒ press the
screen or hold the button down to return to the
standard screen without storing.
SERVICING AND
IMPORTANT The setting will increase or decrease
MAINTENANCE
by one unit each time the
pressed. Holding the button down causes an
automatic rapid increase/decrease. Complete the
TECHNICAL
adjustment with single presses of the button when
SPECIFICATIONS
you approach the desired value.
INDEX
12
button: the "year" will flash on
or button to make the
button briefly: the "month" will flash
or button to make the
button: the "day" will flash on
or button to make the
button briefly to return to the menu
or button is
See radio (audio information display)
With this function the display shows information
about the sound system.
❒ Radio: selected radio station frequency or RDS
message, automatic tuning activation or
AutoSTore;
❒ Audio CD, MP3 CDs: track number;
❒ CD Changer: CD number and track number.
To show the sound system information on the
display (On) or clear it (Off), proceed as follows:
❒ briefly press
button, ON or OFF flashes on the
display according to the previous setting;
❒ press the
or button to select;
❒ press the
button briefly to return to the menu
screen or hold the button down to return to the
standard screen without storing.
Autoclose (Automatic central locking with car
in motion)
When activated (On), this function locks the doors
automatically when the vehicle speed exceeds 20
km/h.
To activate or deactivate this function, proceed as
follows:
❒ press the
button briefly to make the display flash
"On" or "Off" according to the previous setting;
❒ press the
or button to select;