Aux Offset Function; Radio Off Function; System Reset Function; Phone Set-Up - Fiat Panda Owner's Handbook Manual

Hide thumbs Also See for Panda:
Table of Contents

Advertisement

The display shows the current function status:
❒ "Speech Off": function deactivated.
❒ "Speech volume 23": function active with volume
setting 23.

AUX OFFSET function

(alignment of the portable device volume with
that of the other sources)
This function enables the alignment of the volume of
the AUX source, depending on its own portable
player, with that of the other sources.
To activate the function, press the MENU button and
select "AUX offset".
Press the buttons
volume value (set from – 6 to + 6).

RADIO OFF function

(on and off mode)
This function is used to set the radio turning off
mode to one of two different settings. To turn the
function on, use the
The chosen mode appears on the display:
❒ "00 MIN": the radio turns off automatically in
connection with the ignition key; the radio turns
off automatically as soon as the key is turned to
the STOP position;
❒ "20 MIN": the radio turns off independently of the
ignition key; the radio remains switched on for a
maximum period of 20 minutes after the key has
been turned to the STOP position.
256
or
to decrease or increase the
or
buttons.

SYSTEM RESET function

This function is used to restore all settings to the
factory values.
The options are:
❒ NO: no restore intervention;
❒ YES: the default parameters will be restored.
During this operation, the text "Resetting" appears
on the display. At the end of the operation, the
source does not change and the previous situation
will be displayed.
PHONE SET -UP
If a hands-free kit is installed on the car, when there
is an incoming phone call the radio audio will be
connected to the telephone output. The incoming
telephone sound always arrives at a fixed volume, but
it can be adjusted during the conversation using the
ON/OFF button/knob.
The fixed telephone audio volume can be adjusted
using the "SPEECH VOLUME" function in the Menu.
The text "PHONE" appears on the display during the
telephone audio deactivation.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents