Table of Contents
Advertisement
13. Connect the power cable to the back of the drive. The connectors are keyed
14. If you have other options to install or remove, do so now.
15. Replace the cover (see "Replacing the cover of the 6226" on page 72).
16. Reconnect the external cables and power cords; then, turn on the attached
Installing a drive in bays 3 or 4
To install or replace drives in bays 3 or 4 of the IBM IntelliStation E Pro Type 6226
computer, complete the following steps:
68
IBM IntelliStation E Pro Types 6216 and 6226: Hardware Maintenance Manual
and can be inserted only one way.
devices and the computer.
1. Read the information in "Preinstallation steps" on page 64.
2. Turn off the computer and attached devices, and disconnect all external cables
and power cords.
3. Remove the cover (see "Removing the cover of the 6226" on page 60).
4. Disconnect power and signal cables to the drive.
5. If you are installing a new drive, use a screwdriver to pry the electromagnetic
cover from the drive bay.
6. Rotate the drive bay cage where you want to install or replace a drive out of
the computer chassis.
Advertisement
Table of Contents
